Mixer GX-MX1014-Z/GX-MX1016-Z

— Compact design supports both desktop and cabinet installation, equipped with 60mm high-precision faders with dust  screens.  

— Features 6/8 balanced XLR microphone input and balanced TRS line input channels.  

— Incorporates 2 stereo input channels that support either balanced XLR microphone input or balanced TRS line input for  connecting stereo or mono input signals.  

— 2 RCA stereo unbalanced line input channels for connecting stereo equipment.  

— Equipped with 6/8-channel INSERT break points and compressor controls.  

— Provides 2 main mix XLR stereo outputs and 2 TRS stereo outputs, along with a break point for the main mix outputs. 

— Includes 2 DFX output interfaces, 2 control room monitoring output interfaces, 4 TRS group output interfaces, and 4 AUX  send output interfaces.  

— Mono input channels feature a 3-band equalizer with mid-frequency sweep, while stereo channels have a 4-band fixed frequency equalizer. All bands support a boost/cut range of 15dB.  

— Mono input channels are equipped with a steep 18dB/octave low-cut filter to effectively reduce power interference noise  and stage vibrations.  

— Input channels 1 and 2 have a high-impedance switch that allows for the connection of high-impedance signals. 

— The input channels utilize ultra-low noise discrete microphone preamplifiers with support for +48V phantom power. 

— Input channels have gain knobs for adjusting the input signal level.  

— Mono input channels have compression knobs that allow for adjusting the compression amount, resulting in smoother,  more dynamically balanced signals and an overall boost in signal level.  

— Input channels have pre/post fader switches and AUX return knobs with level control, enabling the selection of either the  pre-fader or post-fader signal to be sent to AUX1 and AUX2 mix outputs.  

— Features 4 auxiliary send controls for adjusting the signal level sent to the auxiliary buses, with a range of -∞ to +10dB. 

—  Each input channel has a PFL(Pre-Fade Listen)button that routes the signal to the headphone output. 

— Has separate switches for tape recorder input/output, routing signals to the control room output. 

— Each channel is equipped with a mute button, which attenuates the channel fader to the lowest position and turns off the channel's output signal, excluding signals sent to pre-fade auxiliary sends, channel inserts, and PFL. 

— Incorporates a built-in USB player with USB playback functionality, sending audio to the stereo channels for playback.  Supports APE, FLAC, MP3, WAV lossless audio formats.  

— Supports recording and playback functions, with a USB soundcard for direct connection to a computer, enabling  recording and playback through the USB interface.  

— Has a POWER LAMP interface supporting 5V 500mA DC output for connecting USB-powered lights. 

— Features built-in DSP(Digital Signal Processing)audio software and a 24-bit DSP effects processor with 99 digital effect  presets to choose from, including Echo, Vocal, Plate, and various dual-effect combinations.