Interpreter Console IC-2032N

— In compliance with IEC60914 international standard.

— The design of physical buttons/knobs is user-friendly with good touch sensitivity, accurate response, long service life, and no mechanical button noise.

— Equipped with fully digital audio technology and a high-speed CPU.

— Interpreter console, conference terminal, power HUB, and conference server are all connected via network cables, reducing project workload and simplifying large-scale installations.

— Supports hand-in-hand, star, and mixed connections; the system is highly stable and reliable, with one terminal’s breakdown not affecting others and cabling faults not impacting the entire system.

— Automatic restoration function: supports hot plug.

— Supports 48kHz audio sampling frequency with acoustic frequency response up to 20Hz to 20kHz.

— Built-in high-performance digital audio processor (DSP) to remove unnecessary low frequencies and avoid acoustical shock, improving sound clarity.

— Supports 32 channels of simultaneous interpretation (including the floor channel).

— Supports direct and relay interpretation.

— 7-inch TFT LCD screen displays setting information, input, and output channel information.

— Channel selection button: long press to quickly increase/decrease the channel, short press to incrementally adjust the channel.

— 7 input channels can be preset with corresponding shortcut keys and input channel occupation indicators.

— 3 output channels can be preset with corresponding shortcut keys; when all interpreter consoles are closed, the output channel can automatically switch to the floor channel.

— Standard cardioid directional electret microphone with indicator ring (On/Off); multiple soft gooseneck microphone stems available (standard: 410mm; optional: 310mm/510mm).

— Pluggable microphone stem for easy disassembly during maintenance.

— Built-in 2W loudspeaker with volume switch; can play the floor channel or interpreted channel language.

— Channel interlock function: preset output channels will skip occupied channels automatically; channel output can be set to interlock or free mode.

— The number of interpreter consoles in the same room is not limited.  

— Through software setting, multiple interpreter consoles can be set up in a single language channel. When the interpreter console in the same language channel turns on the microphone, the microphone of the previous interpreter terminal will be automatically turned off.  

— MUTE key to enable a brief muting of the microphone for cough cut.  

— Speaking Speed remind function: the interpreter can press the “slow” key to remind the speaker to slow down the speaking speed (The microphone’s indicator ring or screen will flash).  

— Left and right headphone output jacks (3.5 mm×2) to connect the headset to listen to the floor or interpreted channel language, with left and right selection buttons; headphone volume is adjustable.  

— Left and right microphone input jacks (3.5 mm×2) can be connected to an external microphone, with left and right selection buttons, to meet different usage scenarios.  

— Left and right recording output jacks (3.5 mm×2) can be connected to a recording device, with left and right selection buttons; the output audio depends on the channel listened by the interpreter console.  

— Message function: text messages can be sent to the interpreter terminal through management software.  

— Call service function: interpreters can call the administrator for help through the interpreter console.  

— Setting the interpreter console information can be locked by password; the interpreter can use the setting function through password and IC card.  

— No need for an independent system connection; it can be mixed connected with all conference terminals. 

— Highly resistant to mobile phone interference.  

— Every interpreter comes with a unique serial number, and the conference system supports automatically or manually assigning ID to the corresponding equipment.  

— Interpretation timing function (timing unit: hour/minute).